Operator's Manual

3-1
Chapter 3 Operation Preparations
3.1 Unpacking and Checking
Before unpacking, examine the packaging carefully for signs of
damage. If any damage is found, please contact the carrier
immediately.
If the packaging is intact, perform unpacking inspection according to
the following steps:
1. Open the package and take out the device and accessories
carefully.
2. Check all materials according to the packing list.
3. Check the device for any mechanical damage.
4. Check the accessories for scratches or defects.
Contact Carewell in case of any problems.
Warning
Keep the packaging materials out of the reach of children. When disposing
of the packaging materials, be sure to comply with your local waste control
regulations or the hospital’s waste disposal system.
3.2 Selecting an Installation Location
Select a place where the infrastructure and mains supply is well set
up. Place the device in a flat operating table. The operating
environment of the device must meet the requirements specified in
this manual.