Operator's Manual

2-20
To enter the demo mode, follow the steps below:
1. Click [ ] button in the lower right corner of the main screen to
open the menu screen.
2. Click the [Setup] button to enter the setting screen.
3. Click [System Setup] → [Demo].
4. Select [Normal ECG] or [Abnormal ECG].
When the demo mode is enabled, both the waveform area of the
acquisition screen and the parameter information area at the bottom
left of the printed report display the word "Demo”.
To exit the demo mode, click the [Exit] button in the upper right
corner of the screen.
Warning
The Demo mode is mainly used to show the performance of the device
and to train users. In clinical use, do not set the device to Demo mode
when connecting patients, to avoid mistaking the Demo waveform for
patient’s waveform, which may result in delayed diagnosis and treatment.