Operator's Manual

2-19
inactive for a predefined time limit.
To set the time to automatically enter the standby mode, follow the
steps below:
1. Click [ ] button in the lower right corner of the main screen to
open the menu screen.
2. Click the [Setup] button to enter the setting screen.
3. Click [System Setup] → [Other Setup] → [Auto Standby].
4. Set the time to automatically enter standby mode.
In the standby mode, the display screen is black, and the device
enters the power saving state.
To exit the standby mode, short press the Power On/Off key or click
the touchscreen.
2.7.4 Demo Mode
In this mode, the device can demonstrate its main functions when a
patient or patient simulator is not connected.