Operator's Manual

2-18
mode, which is most frequently used clinical mode. In this mode, you
can perform ECG measurement, record waveforms, measured
values and analysis results, set up the system, print ECG reports
and export ECG data.
In the auto diagnosis mode, click the exit icon in the upper right
corner of the screen to exit the current mode and return to the login
screen.
In AI diagnosis mode, click the user icon in the upper right corner of
the screen to view the current user name, click [Logout] button to exit
the current account and return to the login screen.
2.7.2 Emergency Use
In case of emergency, click the [Emergency] button to enter the
emergency use mode. This mode only displays the acquisition
screen. You can collect, display, obtain and print measured values
(no diagnosis results).
After entering the emergency mode, both the waveform area of the
acquisition screen and the information area at the bottom left of the
printed report display the word "Emergency”.
Click the [Exit] button in the upper right corner of the screen to exit
the emergency mode and return to the login screen.
2.7.3 Standby Mode
When there is no user operation and all leads off within the set time,
the device automatically enters the standby mode if the device is