Use Instruction

9
8.2 LCD Display Introductions
9 INSTALLATION AND USE
9.1 Battery level Introduction
In shutdown mode, Press the Start/Stop button/memory button/setting button, then enter into
measuring pattern/recording pattern/setting pattern. When it displays, system will detect the battery level
and will indicate the battery level on LCD display. Details are as follows:
1) Battery Level is full or enough:
Display the battery full icon( ) or the battery icon ( ), user can take measurement and read the
memory.
2) Battery Level is low:
Display power insufficiency icon ( ), then blood pressure can be measured and memory can be
checked, but user should prepare battery timely.
3) When the battery is exhausted:
Display the exhausted icon ( ), It flashes 5 times and monitor will shut off immediately”.
9.2 Using the device used to provide power
1) To connect the External Power Equipment
a) If you use AC adapter, please insert the AC Plug into the adapter Jack, then Please connect the
DC output power plug of the adapter to the USB power port of the monitor.
b) If you use other device used to provide power, please connect the DC output plug to the USB
power port of the monitor.
2) To disconnect the External Power Equipment
a) If you use AC adapter, please hold the housing to remove the AC adapter from the electrical
outlet, then remove the AC Adapter plug from the monitor.
b) If you use other device used to provide power, please remove the DC plug from the USB power
port of the monitor.