Use Instruction

15
10.3 Memory Deletion
In view of the memory, press and holding down the “MEM” button for about 2 to 5 seconds, and when the
screen is fully displayed as “--”, then the memory is deleted.
Memory deletion is a one-time removal of all measurement data under all users.
10.4 Read the Memory
In the first time, press the “MEM” button, the “AVG” and “MR” icons are lighted, and display the average
value of the first 3 times (when the number of the memory is greater than or equal to 3 groups);
In the second time, press the “MEM” button, “MR” icon is lighted, then the measurement records can be
viewed, and long press the “MEM” button can quickly view the memory.
10.5 Memory Deletion
In power off mode, press and holding down the “MEM” button for about 5 seconds, and when the screen is
fully displayed as “--”, then the memory is deleted.
Memory deletion is a one-time removal of all measurement data under all users.
10.6 Entering static pressure measurement method
1) Short press the “MEM” button, then press and hold down the “MEM” button & the “START/STOP”
button for about 2s, Low pressure display area on the screen display the figure 0, and enter the static
pressure measurement mode after releasing the button.
2) After entering the static pressure measurement mode, short press / long press “START/STOP” button
can exit the static pressure measurement mode, and return to the time mode.
10.7 Bluetooth connection
Turn on the blood pressure monitor first.
Open the APP "Cloud blood Pressure" or the extended APP based on cloud blood pressure on
the terminal.
Start the Bluetooth communication of the mobile phone, enter the APP measurement page, find
the monitor and connect it.
Bind the straps according to the instructions and click "Start" button to measure.
The measurement results are displayed on the "Measurement" and "Record" pages.
11 ERROR AND FAULT INSTRUCTIONS
11.1 Troubleshooting tips
PROBLEM
CAUSES AND SOLUTINS