Use Instruction

14
a) Please consult a health care professional for interpretation of pressure measurements.
b) The pictures in the measurement interface are only for reference.
10 FUNCTION SPECIFICATION
10.1 User Setting
1) In shutdown state, long press the “ON/OFF” (or name: START/STOP) key to enter user selection,
press “MEM” to switch users.
2) Then press the “ON/OFF” (or name: START/STOP) key to enter the date setting and press the " MEM
" key to set the year.
3) Then press the “ON/OFF” (or name: START/STOP) key, the month number flashes, and enter the
setting month state, press the " MEM " key to set the month value.
4) Then press the “ON/OFF (or name: START/STOP) key, the date number flashes, and enter the
setting date state, press “MEM” key to set date value.
5) Then press the “ON/OFF” (or name: START/STOP) key, the "SY" icon flashes and enter the setting
hourly system stat, press the memory key to set the day to 12 hours or 24 hours.
6) Then press the “ON/OFF” (or name: START/STOP) key, the number of hours flashes, enter the setting
hour state. PM is displayed in the afternoon (if the system is set to 24 hours, PM Icon is not displayed
in the afternoon), press “MEM” key to set the hour value.
7) Then press the [on/Off] (or START/STOP) key, the minute number flashes and enter the setting minute
state. Press “MEM” key to set the value of minutes.
8) Then press the “ON/OFF” (or name: START/STOP) key, the unit flashes, and enter unit setting state,
press the memory key to switch the unit of pressure (Unit of pressure: mmHg or kPa).
9) Then press the “ON/OFF” (or name: START/STOP) to enter the alarm clock setting state, AL and user
number appear on the screen, and hour value flashes, press “MEM” key to set the hour value. then
press “ON/OFF” (or: Start/Stop) key, the minute value flashes, press the “MEM” key to set the minute
value.
10) Then press the “ON/OFF” (or name: START/STOP) key, the alarm switch flashes, press the “MEM”
key to set whether to enable the alarm (OF means to turn off the alarm, ON means to enable the
alarm). When the alarm rings, press any key to exit (note: each user can set the alarm separately).
11) Then press the “ON/OFF” (or name: START/STOP) key again, then shut down and save the setting
result. Manual shutdown during the process or automatic shutdown without any action for 60(+/-5)
seconds will save the Settings.
10.2 Voice Switch
Toggle the toggle switch on the shell side. Toggle to the " " side to turn on the voice broadcast, and to the
" " side to turn off the voice broadcast.