Use Instruction

11
6) The CUFF must be neither too tight nor too loose, tightly wrap the cuff, and fix it with cloth buckle.
Leave a finger gap between the arm and the cuff.
7) Adjust the upward direction of the machine body on the left upper arm.
Note:
Please refer to the CUFF circumference range in “PRODUCT SPECIFICATIONS” to make sure that the
appropriate CUFF is used.
– Please keep the CUFF clean. If the CUFF becomes dirty, please do not use water to clean or
moisten the CUFF, and when necessary, absorbent cotton dipped with 75% medical alcohol can be
used to wipe it gently, so as to conduct disinfection（See clause “MAINTENANCE
，REPAIR AND
CALIBRATION” ）.
– Never dry the CUFF in clothes dryer or iron it. Clean the CUFF after the usage of every 200 times
is recommended.
– Do not place the CUFF around your Arm if the Arm has any inflammation, acute diseases,
infections skin wounds.
Warning:
1. Unclean CUFF may cause the following Risks:
– Potential allergic reactions to accessible materials used in the ME EQUIPMENT;
– Contact injuries.
2. Strangulation Risk due to cables and hoses, particularly due to excessive length.
Follow the instructions of your physician or licensed healthcare provider.
9.4 Body Posture During Measurement
Body Posture during measurement as the right figure shown.
Sitting Measurement – Recommended Position
1) Sit up right.
2) Place palm upside in front of you on a flat surface
such as a desk or table, with your elbow resting on a chair or table.
3) The band should be at the same levels as your heart.