SMART EYE MASSAGER Instructions for Use Model: AM1210, AM1220,AM1230,AM1510,AM1520,AM1530,AM1231,AM1260 Thank you for purchasing this Smart Eye Massager. Please read this manual carefully before using the product, and keep it in a safe place for future reference.
Table of Contents SMART EYE MASSAGER ............................................................................... 1 Instructions for Use .......................................................................................... 1 1 Introduction ................................................................................................... 2 2 Cation, Safety and Warning .......................................................................... 3 3 Inside the Package ...................................
2 Cation, Safety and Warning Warning Please read the instruction for use carefully and operate accordingly. 1) Children under 7 years old cannot use the massager. 2) This massager should not be used by people who suffer from brain disease, eye disease, or another physical or mental disorder. 3) For patients with deep stroke, hypertension and hypoglycemia, please use with caution and follow the doctor's guidance. If you feel uncomfortable during use, please stop using.
5 Product Specification Item Working voltage Rated power Working time Temperature of Hot compress Power Charge port Normal working condition Charger Dimension Net Weight Description 3.7V 5W 15 min. 40 +/-3 oC Li-on, 3.7V 850mAh Type-C +5℃ to +40℃, 15% to 85%RH; 80kPa to 106kPa DC 5V 500mA LxWxH=207x110x82mm Approx.
9.1 Power on / Mode Button （Applicable Model : AM1231、 AM1260） 1) Long press this button: long press about 3 seconds to turn on the massager or turn off it. 2) Short press this button: enter switch mode(default). No.
5) Four-click function：click four times,about 0.5 seconds of beep, indicating that the volume adjustment mode is entered： ① Then press and hold the button for 2 seconds to start the volume increase, and the beep will become longer when it reachs the maximum volume; ② Then press and hold the button for 2 seconds to start treducing the volume . After reaching the minimum volume , the beep will become longer . 9.
9.3 Power on / Mode Button （Applicable Model : AM1510, AM1520, AM1530） 1) Long press this button: long press about 3 seconds to turn on the massager or turn off it. 2) Short press this button: enter switch mode(default) No.
10 Clean and Disinfection 10.1Clean Clean the shell with a soft dry cloth at least every other month. Do not use any abrasive or volatile to clean the massager. 10.2Disinfection Clean the massager with medical gauze in 75% medical alcohol to wipe the skin contact for disinfection, dry thoroughly and then store or for taking a measurement. 11 MainTenance, Repair 1) When it is not in use, please keep the massager and its accessories in the packing box.
h) Drop, collision and bending, etc. may reduce the performance of the battery; if the battery is found abnormal, such as packaging damaged and battery pack deformation, etc. do not use these batteries. 12 Troubleshooting tips Problem No power or no working. The massage was too weak. No indicator light. Cause Too lower power. Low power. 1. The Type-C port is faulty or connector disconnected. 2. The charger failed. Correction Charge the massager before turning it on. Charge the massager. 1.
Art.3.2 Radio 489-17 V3.2.4 (2020-09) ETSI EN 300 328 V2.2.
harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
