V1.0 Wi-Fi Smart Plug Wi-Fi Power Extension User Manual Shenzhen Bobotel Technology Dev. Co., Ltd. https://www.kaforto.
Dear Users Thank you very much for choosing our Karfoto Wi-Fi smart plug and Wi-Fi power extension. It adopts current emerging Wi-Fi technology and top manufacturing process, which is developed by years of R&D experience. It supports mobile APP to remote / local control electrical equipment at home (such as lighting, electric fan, humidifier etc). Please read this instruction carefully in order to install and use this product correctly. Product Features 1. Support Wi-Fi 2.4GHz 802.
Attention: No registration code needed if email method chosen. Notice: There are two mode configurations for your selection (fast mode / AP mode) before adding the device to the APP. Fast Mode is recommended. Fast mode configuration (common) 1. Ensure fast mode configuration is activated and the indicator lights quickly turn blue (2 times per second). If the blue light flickers slowly (once every 3 seconds), hold the power button on the smart plug for 6 seconds until the light flickers quickly. 2.
3. Connect smart plug to your Wi-Fi network according to the instructions in the application. 4. Once connection is done, App will prompt you to connect and click "finish". 5. Now you can control the smart plug through " Kaforto" APP. 6. Once confirmed, the indicator light will turn to pure red and the device will be added to the "Device List". AP Mode Configuration 1. Make sure that the AP mode configuration is activated and the indicator lights are slowly flashing blue (every three seconds).
2. Click "+" icon at the top corner of "start your smart life" tab, and click "AP mode" at the top right corner of "Add Device" tab to add devices.
3. Follow instructions in the application to connect the smart plug to you Wi-Fi network. 4. Once completed, App will prompt you to connect and click "Done". 5. Now you can control the smart plug through "Kaforto" APP. 6. After successful configuration, the indicator light changes to pure red and adds the device to the “Device List”. Please note: you can add the smart plug to Echo / Google Home according to the following instructions.
How to connect smart plug to Amazon Alexa 1. Start Smart Life App, log in account, and make sure the smart plug is in the device list. 2. Modify device name so that Alexa can easily recognize, such as: living room light, bedroom light etc. 3. Minimize smart life App, then launch Alexa App , sign in your Alexa account and make sure you have at least one Alexa voice-control device installed like Echo, Echo dot etc. 4. In the upper left corner of home page, click button to show App menu.
6. Enable Smart Life APP, then sign in your Smart Life account to complete the account link.
7. After successfully logging in your account, use Alexa to search for new hardware, after searching for 20 seconds, all new smart hardware that can be added will be displayed.
8. Back to Menu by clicking button. button, and the click 9. In Smart Home page, you can group different categories of devices. Your intelligent life application is already proficient with Alexa. Now you can control your smart plug with Alexa.
How to connect Smart Plug with Google Home 1. Launch Google Home App and make sure Google home speaker is installed. If not, please follow Google home speaker installations to complete the installation. 2. After installing Google Home, click button in the upper left corner of the App Home page to show App menu. Then click "Home Control" in the menu. 3. On “Add devices” page, scroll down to find “Smart Life” and click it. Sign in Smart Life App with your account and password.
4. After successfully linking the account, you can see all the smart devices from your Smart Life App account in Google Home App. You can assign rooms for each device. 5.
12
Troubleshooting and FAQ 1. What devices can I control with the Smart Plug? You can control lights, fans, portable heaters, and any small appliances in accordance with the smart plug specifications. 2. What should I do when I cannot turn Smart Plug on or off? Make sure your mobile devices and the smart plug are connected to the same Wi-Fi network. Make sure the devices connected to the smart plug are turned on. 3.
Wireless mode cann’t be 11n only. Check for Wi-Fi interference or relocate the smart plug to another location within the signal range. Check whether the number of devices connected by the router has reached limit. Please try to turn off Wi-Fi function of some devices and reconfigure smart plug. Check if router’s wireless MAC filtering function is enabled. Remove the device from filter list and make sure the router is not prohibiting smart plug from connection.
5. How can I share my device with family? Open App, go to"Profile"->"Device Sharing"->"Sent", tap "Add Sharing", now you can share your device with added family members. 6. How to reset this device? Factory reset: After smart plug is plugged into a power socket, press and hold the power button (6 seconds) for factory reset until the indicator light blinks blue rapidly. Indicator lighting pattern: Fast flashing blue (twice per second): Fast mode configuration is initiated.
FCC WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
