User's Manual

Attention: No registration code needed if email

method chosen.

Notice: There are two mode configurations for your

selection (fast mode / AP mode) before adding your device

to the APP. Fast mode is recommended

Fast mode configuration(common)

1. Ensure that the fast mode configuration is activated

first,conduct WiFi paring with smart lights,control

power switch of the bulbs manually,turn on the switch,

turn off the light after one second.Repeat three times until

the power is turned on,and then the bulb lights up and

flickers quickly.

2. Click "+" on the top right comer of “Kaforto", select

device type and enter "Add Device”.