User's Manual

and router within certain distance.

⑧ Whether connected devices have reached

maximum number of router’s connections. If so, please

try to turn off Wi-Fi connection on some device.

⑨ Enble router’s wireless MAC filtering function,

remove device from the filter list and make sure

that router is not prohibiting device from connection.

5. Make sure password entered in App is correct

when adding new device.

How to reset device?

① Turn on/off the light step by step: power on device

first, power off after 10s and then power on, turn

on-off-on-off-on (keep short interval,turn

off after light is on) until the light bulb is quickly flashing,

representing reset successfully.

② If the light is not flashing,please repeat above steps.

③ If the light flashes quickly (two times per second),

representing EZ mode.

④ If the light flashes slowly (one time per three seconds),

representing AP mode.

How to add device under EZ mode?

① Make sure that the light is quickly flashing.

② Phone has connected to Wi-Fi router and been

able to connect to internet.

③ Tap “Add device” in App and enter correct Wi-Fi