User's Manual

/ 03/ 02
EN
SPECIFICATION
Model IL-YX3050-DM-KY241A6-01
Product Name
Touchable Floor Lamp with Remote Controller
Max Power
30W
Adapter output DC24V/1.6A
Input AC100-240V 50/60Hz
Output DC24V /1.6A
1. Get the wire through out the support metal piple to the “Touch Swithc”
2. Then You can complete the floor lamp by order from ①to⑤ ,see picture
3. Insert the wire from place②,then go down to the place⑤
(Note: Ensure the wire go through to the bottom place⑤)
4. Get wire connected to the adapter, see ⑥&⑦
5. Operation in 2 way
Way 1：Touch Key-press
Details: Two models with TP1 Touch Key-press
A.TOUCH PRESS Touch-Key-press：TP1 Press to turn on and dim, specially：
touch press, turn on the light(D1 indicator out), default reading mode(warm&cool light
mixed), brightness 100%(highest); Touch press one more time, brightness down to
60%(midium) at the same mode;Touch press again, brightness down to 10%(lowest)
with mode unchanged; Touch press the 4th time, turn off the lights(D1 indicator on)
You can repeat the performance by the same way above
B.Hold Down Touch-Key-press: Hold down Touch-key-press to switch working modes：
Touch press to turn on the light first,Hold down press for 3 seconds, switch to general
lighting mode with cool white light at highest brightess Hold down press for another 3
seconds, switch to leasure mode with warm white light at highest brighness Hold
down press for 3 seconds again, switch to reading mode with warm&cool
You can switch modes repeatly by the way above
Remark: Indicator D1 working modes: DI indicate white light, indicating the lamp live;
D1 indicator lights out, the floor lamp start working
Way 2：Remote Controller
A.First you need to match the Remote Controller with the lamp by pressing matching
button as below:
Press button “LO”+“HI” at the same time to activate the RF modular
(transmission and receiving connected), the indicator D1 will flash 5 times if connection
completed.(You may not control the floor lamp if not get remote controller and
receiving modular in the lamp connected and please try until you complete the
connection before you can control the floop lamp)
B.Press any button to have desirable function and color temperature
Remote Controller graphic(the left) and 12 Functional buttons definition(the right)
ON
LO MI HI
OFF
ADAPTER SPEC:
Cautions
1. This movable floor lamp is not suitable for use on the bevel
2. Please do not try to repair or tear apart of the power supply and Lighting Source in any cases.
Please refer to retailers or any qualified engineers to change or repair the DC power source if
damaged to avoid any risk of electric shock and fire dizaster
3. Please do not touch the live light with wet hands
4. It is for indoor use only. Please keep it away from liquid or damp locations to avoid fire
dizaster
5. Please power off the light before you use dry wiper to clean the surface in case of any need
6. Please keep the lamp away from heat reources and strong sunshine light
7. Please do not overload the lamp to avoid potential fire dizaster
38W