Specifications
Table Of Contents

Revision History
Revision
Summary
Release Date
1.0
Official release
2020-12-11
1. Introduction
BL-M5621DS2A module design is based on UWE5621DS solution, The UWE5621DS is a is a highly
integrated 2-in-1 connectivity single chip which has built in a 2x2 dual-band wireless LAN radio and
Bluetooth radio. It includes 2.4 GHz and 5 GHz WLAN IEEE 802.11 a/b/g/n/ac 2x2 MU-MIMO 20/40/80
MHz VHT R2 MAC/PHY/Radio, Bluetooth 5 with supporting high power mode, Mesh, Direction Finding
and Long Range. Additionally, this radio-on-a-chip integrates power amplifiers, receive low noise
amplifiers and RF TR switch. It supports SDIO 3.0 and PCIe Gen 2 compliant slave interfaces for Wi-Fi,
high-speed 4-wire UART for Bluetooth.
1.1 RF module Overview
The general HW architecture for the module is shown in Figure 1.
ANT
DPX
2.4G Tx/Rx
Xtal
26MHz
UWE5621DS
2T2R
802.11AC&BT5
3.3V-1.2V
5G Tx/Rx
5G Tx/Rx
2.4G Tx/Rx
DPX
ANT
ANT
BT Tx/Rx
SDIO、UART、PCM
BT










