User's Manual

BFOUR SMART MEAT THERMOMETER
USER MANUAL
USER MANUAL
USER MANUAL
APP: Grill 5 0
APP: Grill 5.0
Ct i
di @ bf
Customer service:
[e-mail]
Website: www.szbfour.com
Webs te: www.s b ou .co
1 Warning Instructions
1.Warning Instructions
Read and follow all the safety instructions:
ead a d o o a t e sa ety st uct o s

Keep the product away from children

Keep the product away from children.

Dttth dtiid

Do not put the product inside a
microwave.

Do not touch the probe or wire during or

Do not touch the probe or wire during or
ft di tl b it' h t Pl
after use directly, because it's hot. Please
wear heat
-
insulating gloves to avoid burns.
gg

The needle probe and wire probe are not

The needle probe and wire probe are not
waterproof Do not soak either in water or
waterproof. Do not soak either in water or
place them inside a dishwasher. To clean,
p
rinse them gently with water then wipe until
rinse them gently with water, then wipe until
completely dry
completely dry.


Do not use corrosive chemicals when
cleaning the product.
cleaning the product.
h
2.What you get
2.What you get
Item
Quantity
Meat Thermometer
1
Meat Thermometer
1
Probe
2
Charge
line
1
Charge
line
1
Manual
1
Manual
1
3AtaGlance
3.At a Glance
l
3.1 Screen Display
3.1 Screen Display
①
PtT t fPb1
①
Preset Temperature of Probe 1
②
Preset Temperature of Probe 2
p
③
Real
-
time
temperature of the probe2
③
Real
time
temperature of the probe2
④
Real
-
time
temperature of the probe1
④
Real
-
time
temperature of the probe1
⑤
Timer
⑤
Timer
⑥
Bl t th C t d
⑥
Bluetooth Connected
⑦
⑦
Battery Level
32B F i
3.2 Button Function
3.2 Button Function
➑
➑
Power off/on, Cancel/Confirm
➑
/, /
➒
Function selectio
n
➒
Function selectio
n
➓
I
➓
Increase
⓫
Decrease,
℃
/
℉
switch
⓫
Decrease,
℃
/
switch
4 Using Yo r De ice(In stand
4.Using Your Device(In stand
-
g(
ltid)
alone operation mode)
p)
41TemperatureDetection
4.1Temperature Detection
p
①
Clean the probe and insert it into the meat Probe
①
Clean the probe and insert it into the meat. Probe
insertion location depends on the meat being
insertion location depends on the meat being
kd
cooked
②
②
Then, insert the probe cable into the probe port
on the meat thermometer. Place the food into the
oven grill..etc
oven grill..etc
③
Long press the Switch button for 3s3 to power
③
Long press the Switch button for 3s3 to power
On/off
On/off
④
Th i l f h b d f d ill
④
The internal temperature of the probed food will
display"MEAT TEMP."
4 2Alert Setting
4.2Alert Setting
g
a
Press the "Set"button to enter the Alert Setting
a
.
Press the Set button to enter the Alert Setting
mode The "SET TEMP" icon will then blink
mode. The "SET TEMP" icon will then blink.
b
"
"" " h
b
.
Press"
-
""+"to set the target temperature.
c
.
Press the"Set" button again to complete Alert
Setting.
Setting.
d
When the food temperature reaches the preset
d
.
When the food temperature reaches the preset
temperature level the meat thermometer will sound
temperature level, the meat thermometer will sound
lIfh tdtthGill50
an alarm. If you have connected to the Grill 5.0 app,
you will also receive an alert notification.
e.Press the switch button on the meat thermometer
to turn off the alarm.
to turn off the alarm.
43S t Ti
4.3Set a Timer
431C tD Ti
4.3.1Count Down Timer
1. In the temperature mode, press the Set button,
p,p ,
do not press the +
-
button and then press Set to
do not press the +
button and then press Set to
switch to
Next probe; press again to switch to the
switch to
Next probe; press again to switch to the
time
r
At this time the Timer Icon will start to flash
time
r.
At this time, the Timer Icon will start to flash.
2A hi i h "
"k i
2. At this time, press the "+,
-
" key to start setting
the time
,An inverted triangle icon will be displayed
after the time.
3 After setting the countdown time press OK to
3. After setting the countdown time,press OK to
finish and the device will start the countdown
finish, and the device will start the countdown
N t Th i td ti tti i 99
Note:The maximum countdown timer setting is 99
hours and 59 minutes.
4 3 2Count Up Timer
4.3.2Count Up Timer
1 Press the Set button to switch to TIMER mode If
1. Press the Set button to switch to TIMER mode. If
ld lhi i ill
completed correctly, the timer icon will start to
flash
2 Don't press the "+
-
" button, just press the
p
,j p
confirm button to start timing Don't press the "+
-
"
confirm button to start timing. Don t press the +
button just press the confirm button to start
button, just press the confirm button to start
ti i At thi ti iti t i l i ill
timing. At this time, a positive triangle icon will
appear behind the time.
4 4Backlight
4.4Backlight
Press the power button to display the backlight
ppyg
5Connect
Your Device with
5.Connect
Your Device with
the Grill5 0 APP
the Grill5.0 APP
51Whatyouneed
5.1What you need
A smartphone or tablet running IOS8.0
（
or ablove
pg
）
or Android 4.3
（
or ablove
）
）
or Android 4.3
（
or ablove
）
5 2 Conection instruction
5.2 Conection instruction
1. Download the Grill 5.0APP from the APP
Store(Ios Devices) or Google Pay(Android devices).
()gy( )
2. Turn up Bluetooth on your devices,GPS
2. Turn up Bluetooth on your devices,GPS
positioning needs to be turned on for the first
positioning needs to be turned on for the first
connection
connection.
3
Ohhil b dlikh
3.
Open the hcitool scan button, and click the
device picture after scanning the device to
complete the connection
p
（
APP Use Video
）
（
APP Use Video
）