User's Manual

Shenzhen Belter Health Measurement and Analysis Technology Co.,Ltd
The use of memory function
Press 【MEM 】button, the device shows user's group.Press 【SET】button again, it
shows the latest diagraph result.(Press 【SET】button up to change user)
During the process of reading measuring memory,
When long press 【MEM 】button, all the memory value will be deleted.
If show "---", means delete finished.
This blood pressure is automatically save test value and pulse with measurement
date and time, 60 sets of diagraphs are kept. If saved data is over than 60 sets, the
oldest diagraph result will be deleted, newest one will be saved.
Using steps
1、 Tie up arm to take
A、plug the air tube of the armband into the joint of the product.
B、open the armband,put armband air tube toward the palm inside.(as below
pictures)
NOTICE