User's Manual

Shenzhen Belter Health Measurement and Analysis Technology Co.,Ltd
When arrhythmia situation occurs,the measurement value may be incorrect or can
not be measured.
.Please don't make an effort to curve armband and armband windpipe
.While dismantling an air tube, please take the forepart of the air tube plug to pull out
.Please don't bump shot or drop the product, this may lead to the measurement
value of the product incorrect.
Please do not add pressue before the arm band wraps around the upper arm,or you
can not get correct measurement value.
When the plug or wire of the power adapter is damaged,please immediately drawn it
out of the socket,otherwise may cause the danger of fire or electric shock.
Please do not use wet hand to pull the power adapter from the socket,otherwise may
cause electric shock or fire burn.
Operating instructions:
How to install and replace the battery
1. Downward push the battery cover, remove the battery cover from ontology
2. Install or replace the 4 AA batteries,Make the battery positive (+) and negative (-)
extremely consistent with the marks in the battery box,and then close the battery
cover.
Please replace the battery in the state of the body cut off power.
If you remove the battery in the boot state, then count time to stop.
When the low battery icon () appears on the screen please replace 4 batteries.
Recommend alkaline battery with longer service life.
When 3 month or longer time without the use of the blood pressure please take out
the battery.
After replacing the battery, you may need to reset the date / time.
The method to abandon the battery after use please deal with it according to city
NOTICE
NOTICE