User's Manual

Shenzhen Belter Health Measurement and Analysis Technology Co.,Ltd
Name
Sphygmomanometer
Model number
ePA-46B
Display mode
Display mode
Bluetooth
Supported Bluetooth V2.0
Measurement scope
The pressure measurement scope:0-280
mmHg(0-37.3 kPa)
Pulse scope: 40-200 Time/minute
Accuracy Pressure:±3 mm Hg
Pulse accuracy :±5%
Power DC6v/”AA*4”
Weight 196g
Shape size W74 mm*L152 mm*H33 mm
Arm band size: W154 mm*L 486 mm,air tube to grow
600 mm
（Apply arm the scope22cm-36cm）
operating environment
a) temperature : +5℃-+40℃
a) relative humidity：15%-80%
b) atmospheric pressure :700hpa-1060hpa
Transportation and storage environment a)temperature :-20℃-+50℃
b)relative humidity：15%-90%
c)atmospheric pressure :500hpa-1060hpa
Protection against electric shock internal electric source,.BF application
part
clinical allow maximum error margin
This product pass clinical verification, the clinical
maximum allowable error is ≤±5mmHg/±0.67kPa
Battery service life 300times(alkaline dry battery can use )
product expects life span
2years
CLASSIFICATION
1. Internally powered equipment;
2. Type BF applied part: cuff;
3. IP22;
4. Not category AP / APG equipment;
5. Mode of operation: continuous operation.
Cleaning, maintenance and Storage
Please always clean sphygmomanometer.
Please use clean soft cloth ,gently wipe the LCD and shell, do not use solvents, and do
not be soak it in water or other liquids.
Please do not wash the arm band of the product.
If the product is especially dirty you can use a soft cloth with water or neutral detergent,
fully wring dry to wipe the product.
Please do not use gasoline, thinner or similar solvent to clean arm band.
When you do not use, please storage the sphygmomanometer and accessories in the
collection bag.