User's Manual

Shenzhen Belter Health Measurement and Analysis Technology Co.,Ltd
Even forget to turn off the power ,after about 2 minutes it will shutdown
automatically .
Please measure and control blood pressure at the same time every day.
Measurement should be taken in quiet places ,the measured person should be in a
relaxed sitting position.
You'd better have a rest of 15 minutes before measurement.
data transfer
The data uploads to cellular phone or computer via blue tooth.
Key of symbols
signal Warning-see user manual Treatment
The armband fix too loose Check whether armband
is loose to move, re-
fasten tight again for
measuring.
Speaking during measurement or
move the arm
Keep body and arm stable
and measure again
There's interference or work not
correctly during measurement.
Shut down, re-measure
once.
The product leaks air or arm's
taking don't put good enough.
Please check arm to take
whether already put like.
Battery energy shortage Please replace battery
Excrescent check