User's Manual

13 14
When in doubt
Inflation error
Abnormal blood pressure
Low battery
Please confirm whether the trachea is folded,
etc., and re-measure after solving
Please confirm whether the tube, tube joints and
the main body are tightly connected, and whether
the tube and cuff are broken.
Then re-measure
Please replace 4 new AAA batteries at the
same time
Please rest for 30 minutes before re-measure.
If it is abnormal three times in a row, please go
to the hospital or consult your personal doctor
Reason
Abnormal situation
The measure value
ofblood pressure
abnormal low(high)
No pressure
The cuff exhausts in a
short time
The blood pressure monitor is
working normally, and it is
measured according to the
correct measurement method,
but it is lower (higher) than the
blood pressure measured in
the hospital, and the value
measured each time is different
The cuff is not
wrapped properly
Talk or move arm during
measurement
The rolled up clothes
pressed the arm
The air plug is not correctly
inserted into the air pipe
interface of the main body
Leak in cuff
The cuff is too loose
Taking antihypertensive
drugs.Cuff position
misalignment
Wrap the cuff correctly
Measure quietly.Please refer
to blood pressure
measurement Q&A
Take off the clothes that press
the arm and measure
Connect the air interface and
cuff correctly
Purchase a new cuff.
*The new cuff does not have
an air plug. Please do not throw
away the air plug, install it on a
new cuff and use it
Please wrap your cuff tightly.
*If it is not wound tightly,
excess pressure will be added
to the cuff and its service life
will be shortened.
Please refer to the blood
pressure measurement Q&A.
Handling method
Sudden power failure during
pressurization to reset the
clock
After pressing the button,
nothing is displayed
Other phenomena
If not used for a long time, the
dry battery energy is exhausted
due to temperature changes
Battery energy is completely
consumed
The +-pole of the battery
is reversed
Display screen jitter
Can't measure
Replace with new batteries.
Replace with new batteries.
Insert the battery correctly.
Please press the [ON/OFF]
button and perform the
operation again.
Please try replacing the battery.
Otherwise, it is still unable to
measure, please contact
after-sales service hotline
Tips
About Blood Pressure
What does the systolic blood pressure number mean?
Blood pressure is typically recorded as two numbers, written as a ratio like this:
The systolic reading, or the top number, is the pressure on the blood vessels when
your heart beats and pushes blood through your arteries to the rest of your body.
A normal systolic pressure is lower than 120.
A reading of 140 or higher is considered to be high blood pressure (also called
hypertension).
What does the diastolic blood pressure number mean?
The diastolic reading, or the bottom number, is the pressure in the arteries when the
heart rests between beats. This is the
time when the heart flls with blood and gets oxygen.
A normal diastolic blood pressure is lower than 80.
A reading of 90 or higher is considered to be high blood pressure.
117
76
mm Hg
Err3
Err5