User's Manual

Edition：AO
5、Press start / stop button to start the measurement (SART/STOP)
6、The compression process is complete, the product will gradually reduce the pressure cuff,
relax and keep still and not to talk
7、After the measurement is completed, the air arm belt will be automatically discharged, the
measurement results will be displayed on the surface of the corresponding column
The initial use, please charge the battery, because the internal product factory charged amount and
the storage time of products can lead to battery power consumed.
If wear a thick coat, please take it off, in order to better measure
Pay attention to dress more thick coat will cause a weak pulse, the measurement results of error
Any time to terminate the measurement, but just need to press the start /
stop button(START/STOP), quick exhaust valve will quickly decrease with pressure in the arm
Such as the continuous measurement, the interval time should exceed 10 minutes
How to select the adapter and use
Please choose the output voltage is DC5V, output current is 1A dedicated to medical treatment
power supply adapter.
Please read the wiring in the annex to the insertion product and then connected to the power supply.
NOTICE
（Correct diagraph posture）