Specifications
05
3.Install and replace the battery
The steps to install and replace the battery are as follows
1.Flip the scale to open the battery cover
(Note: When opening the battery cover, hold the battery cover with your
thumb and lift it up).
2. After opening the battery cover, insert the positive and negative terminals
of the battery, and align the battery cover with the battery compartment.
Install and replace the battery
■ It can be used for about 1 year. (In the case of using 4 AAA batteries, the
room temperature is 23 ℃, and the measurement is performed 4 times a day.)
*Do not use a rechargeable battery.
■ “Lo” is displayed, indicating that the battery is exhausted,
please replace the battery as soon as possible.
■ Please replace the battery after turning off the power of the main unit.
Please dispose of the dry battery after use according to the relevant
regulations of urban environmental protection.
The following conditions will automatically shut down.
■ After "0.0kg" is displayed, no operation is performed for about 2 minutes(In
the state where the wifi connection has not yet been made).
■ End of measurement, after leaving the scale about 30 seconds (up to 80
seconds later)
■ When "Err" is displayed (after about 10~30 seconds)
About battery life and replacement
About shutdown