Specifications

14
8.Doubt
Error message icon appears
Abnormal measured value, abnormal operation
Error
message
the reason Countermeasures
Down from the scale
during the measurement
Please take down from the scale after the measurement is over.
"4. Measuring body weight, body fat percentage, visceral
fat index, muscle rate (skeletal muscle rate) and other
indicators")
Please measure the sole of the foot against the electrode.
"4. Measuring body weight, body fat percentage, visceral fat
index, muscle rate (skeletal muscle rate) and other indicators")
Do not move the sole to measure
"4. Measuring body weight, body fat percentage, visceral fat
index, muscle rate (skeletal muscle rate) and other indicators")
Please wipe the sole with a wet towel, etc
Do not use more than 180kg
Please replace the battery
The sole of the foot is
not close to the ITO film
The measurement posture is
incorrect, or the sole of the foot is
not close to the ITO film, or the
sole of the foot is too dry.
Battery usage has run out
Exceeding the weight
measurement range when
measuring
The displayed weight value is
abnormally high or low
Step onto the scale before the
"0.0kg" display
Please press the scale after "0.0kg" is displayed.
"4. Measuring body weight, body fat percentage,
visceral fat index, muscle rate, skeletal muscle rate,
etc."
Please measure on a flat, hard ground
The blood circulation is returned to the normal state by
means of heat or the like before measurement
Put it in a warm room for a while, then measure it after
the ITO film is warm.
Wipe the soles slightly with a wet towel before
measuring.
Measurement posture is incorrect
Measure on soft ground such as
carpet or uneven ground
The sole or body is too cold,
Blood circulation is not smooth
ITO film is too cold
The sole is too dry
The measured values are
abnormally high or low, and the
measured values are very
different each time.
Phenomenon CountermeasuresReason