Specifications

09
6.Use of App
1. Open the "Smart Life" App
Note: Make sure Bluetooth is turned on when using the app
2. Connect the device to the App
Two connection methods (EZ/AP [Direct Connection Mode and
Compatibility Mode]):
A): EZ-direct connection mode: long press the button 4S on the back of
the scale, the Wifi icon flashes quickly, that is, enter the quick connection
mode, open the APP and directly click to add the device, the mobile
phone is connected to the WiFi (2.4G network is required) and the
password is entered. The connection process takes about half a minute
to one minute (depending on the network environment). If the connection
fails, you can repeat the above operation to connect again.
B): AP compatible mode: press and hold the button 4S after the battery
box, the Wifi icon flashes slowly, then enter the compatibility mode, open
the mobile APP, click the compatibility mode in the upper right corner,
and then click Add device, the phone is connected to WFi (2.4 required)
G network) and enter the password, then connect the WiF module
hotspot in the pop-up window (the hotspot name is SmartlifeXXXX), after
connecting, return to the app to connect the device
* Long press the button to switch between EZ and AP modes.
Easy operation steps