BEFORE USE Walkie-talkie Functions at Glance User Manual Removing the belt clip Before insert batteries into the device, first pull the belt clip latch away from the device.
Installing the Batteries 1. Slid down the battery compartment cover. 2. Insert 3* AAA Alkaline Battery (Not included) 3. Position the batteries according to the polarity marking on the battery compartment. 4. After placing batteries into correct positions, put the battery cover back on. Using the device 1. a. Turning the device on/off Switch on the device: short Press the button then you will hear a beep sound. b. Switch off the device: Long Press the button 3 seconds then you will hear a beep sound. 2.
11. Channel and Frequency (MHz) FCC Statement This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
