Instruction Manual

6
translation interface.
First confirm that your device network connection is successful (long press the red / blue
button to start "speak", indicating that the network connection is successful, otherwise
the network connection is not successful, please return to the network connection
interface to reconnect to the network).
1. Language selection: At the top and bottom of the speech translation interface, touch
the red/blue language bar to enter the language selection list, and select the desired
source language and destination language respectively.
2. Voice input: Press and hold the red/blue button (voice input button) on the device to
wait for the screen to start “talking” and start talking to the microphone position to
enter the voice recognition state. (Remember: the red key corresponds to the red
language at the top of the screen, and the blue key corresponds to the blue language at
the bottom of the screen. Be sure to say the corresponding language selected, otherwise
it will not be recognized.)
3. After the hands are released, the voice is automatically recognized and parsed, and
translated into the set target language and broadcasted by voice. Tap the screen speaker
icon to replay the conversation.
4. When the screen list shows too many conversation records, you can slide up and
down to view the conversation record; you can also long press and hold a conversation
record to delete the conversation record.