Instruction Manual

4
provided in the box to charge the device. It is best to charge the device for 1 hour or
after the battery is fully charged.
The device is charged in the off state, and the screen will display a larger charging ID and
percentage of power in about 8-10 seconds.The device is charged in the power-on state,
and the battery symbol in the upper right corner of the screen is marked “Lightning”.
2, Network connection: After turning on the device, enter the network connection
interface, please check if the network connection is successful.
The Smart voice translator should be used in the connected state first, it can connect
to the wireless WIFI or mobile hotspot. (Offline translation response speed and accuracy
are limited, please use voice translation first.)
Go to the "WLAN" interface via the menu "Network Connection" or "Settings" option.
Click the ON/OFF switch button to open the WIFI connection and search for nearby
networks. (If you don't see the network you want, you can try ON/OFF. Open again.)
Click on the WIFI you want to connect to, enter your password and click on "V".
Note: At present, the device only supports WIFI with direct password input.
For some hotels, the WIFI that needs to open the secondary authentication
of the website is temporarily not supported.
3, System language settings
In the main interface, click the "Settings" option to enter the "Settings" interface,