Instruction Manual

3
Button introduction
Power ON/OFF：
1. Power ON/OFF: Press and hold the power button for more than 3 seconds, the power
on/off interface appears, and you can select on/off or restart.
2. Standby: Short press the power button to wake up or standby.
Volume button + -: Tap the volume +-- button to adjust the volume.
Return button O: Tap the O virtual button on the main unit to directly jump to the main
interface of the screen. And you can slide the screen left and right.
Voice left button②③：Enter the speech translation interface as shown 1，The left button
corresponds to the upper red language, and the right button corresponds to the blue
language below.
Example: Enter the voice translation interface as shown 1, long press the voice right
button②Speak Chinese "我爱你" After releasing, automatically dial the English and
display it as shown 2
Speak English and press the left button③，To change the language of the translation,
please click on the touch screen switch.
圖 1 圖 2
Preparation for work before use:
1. Device charging: Before using this device, please check if the device is fully charged.
If the device fails to turn on or the battery is low, please use the dedicated power cord