User's Manual

User Manual
-- 10 --
First Menu Second Menu Third Menu Introduction
Input
Source VGA, DVI, DP Select the input
signal source
Brightness 0-100 Adjust brightness
Contrast 0-100 Adjust contrast
Sharpness 0-8 Adjust sharpness
Saturation 0-100 Adjust saturation
Color Temp 5500K, 6500K, 7500K,
8500K,9300K,11000K,USER
Select the preset
color temperature
Image
Gamma DICOM650 ,DICOM600
DICOM550,DICOM500,
DICOM450,DICOM400,
DICOM350 ,DSA, DSI,
CT MRI ,2.2, 2.0, 1.8
Select the preset
gamma curve
OSD Language
English,
Select the OSD
language
OSD Position Btm Right, Btm Left, Center,
Top Left, Top Right
Select the OSD
position
OSD Rotation 0°, 90°, 180°, 270° Select the OSD
rotation
Auto Scan Input On, Off Select the scan
mode
ALC
On Off
Select the ALC
Setup
Factory Reset >>> Default setting
Auto Adjust >>> Automatically set
the screen
H Position 0-100 Adjust horizontal
position of the
screen
V Position 0-100 Adjust vertical
position of the
screen
Clock 0-100 Adjust the clock
VGA
Phase 0-63 Adjust the phase
Sound
Not Available for
this product
FW Version eg:V1.00 Software version
information
Source eg: DVI Information about
the active source
Status
Format eg:1600x1200 60Hz Information about
the resolution
4. Menu Introduction