User Manual 2MP LCD Monitor C22SP+/G22SP+ Rev.
User Manual Content 1. SAFETY SYMBOLS & PRECAUTIONS ...........................................................................................................- 3 1.1 SAFETY SYMBOLS ............................................................................................................................................ - 3 - 1.2 PRECAUTIONS................................................................................................................................................... - 3 - 2.
User Manual 1. Safety Symbols & Precautions 1.1 Safety Symbols This manual uses below safety symbols. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Alert electrical hazard. Indicates a prohibited action. Indicates to ground for safety.
User Manual Set up the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. - Do not place the unit outdoors. - Do not install the unit in transportation systems (ship, aircraft, trains, automobiles, etc.) - Do not place the unit in a dusty or humid environment. - Do not place the unit in a location where the steam comes directly on the screen. - Do not place the unit near heat generating devices or a humidifier.
User Manual CAUTION Handle with care when carrying the unit. Disconnect the power cord and signal cables and remove the optional unit. Moving the unit with the cord or the option attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet.
User Manual 2. Introduction The LCD Monitor is intended to be used in displaying and viewing digital images, for clinical review , analysis and diagnostics by trained medical practitioners. Each monitor has been precisely calibrated to comply with DICOM Part 14 at factory. It using the latest generation of LED-backlit panel, with high resolution 1600x1200.
User Manual 3. Quick start Note: turn off the power to your computer and monitor. 1. Cable Connection Connect all cables to the appropriate connectors, as shown in below picture. 2. Adjust the height, position and angle of monitor. Screen Rotation Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching with your fingers.
User Manual 3.Boot 3. Turn on the monitor, the power indicator light will become green. Start the computer and set mode of monitor as below: 1200 x 1600 (in portrait mode) If no picture, please refer to the Troubleshooting section of this manual. Warning Please use the attached power cable and connect it to the standard power socket. Make sure the power connector be fully connected to the power socket. To prevent fire or electric shock, the power cable should be used at specified electric voltage.
User Manual 4. Adjustment 1. Signal Light Color Display Mode Green Working Mode Orange Standby Mode No Shutdown Mode 2.Shortcuts Key Left Function Adjust the brightness Right Adjust the contrast Press twice enter the light box model Light box model 3.
User Manual 4. Menu Introduction First Menu Second Menu Source Input Brightness Contrast Sharpness Saturation Color Temp Image Gamma OSD Language Setup VGA OSD Position Third Menu VGA, DVI, DP 0-100 0-100 0-8 0-100 5500K, 6500K, 7500K, 8500K,9300K,11000K,USER DICOM650 ,DICOM600 DICOM550,DICOM500, DICOM450,DICOM400, DICOM350 ,DSA, DSI, CT MRI ,2.2, 2.0, 1.
User Manual 5. Trouble Shooting If a problem persists even after applying the suggested remedies, contact a dealer. Problems 1. No picture Indicator status: Off Points to check with Possible Solutions Check if the power cord is correctly connected. If the problem persists, turn off the monitor for a few minutes, then turn it on and try again. Indicator status: Orange Press the keyboard of computer or click the mouse, turn off the monitor and then restart. 2.
User Manual 6. Cleaning Periodic cleaning is recommended to keep the monitor clean and to prolong its operation lifetime. Note: Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. Cabinet To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent. Do not spray wax or cleaner directly into the cabinet.
User Manual 7.
User Manual 8. Specification 8.1. Specification Panel 21.3”, TFT Color LED screen, anti-glare, hard coating Brightness (typ.) 900 cd/m CR (typ.) 1400:1 Viewing angle Horizontal 176°, vertical 176° CR > 10 Pixel Pitch 0.270 mm Native resolution 1600 x 1200 Display area 432 mm (H) x 324 mm (V) Power DC 12V/6.67A Power consumption Max.
User Manual 8.2. D-Sub Connector Pin 1 4 7 10 13 Signal Red Video NC Green GND GND H-Sync Pin 2 5 8 11 14 Signal Green Video VGA_PLUG Blue GND NC V-Sync Pin 3 6 9 12 15 Signal Blue Video Red GND VGA 5V DDC SDA DDC SCL （*NC：no connection） 8.3.
