User's Manual

14
7.2. DVI(Digital Visual Interface) Connector
Pin Signal Description Pin Signal Description
1 TX2- Channel 2 Data - 13 TX3+ NC
2 TX2+ Channel 2 Data + 14 +5V +5 V from input
3 SHLD2/4 Channels 2 and 4 Shield 15 5V_GND Ground for +5 V
4 TX4- NC 16 HPD Hot Plug Detection
5 TX4+ NC 17 TX0- Channel 0 Data -
6 SCL DDC Clock 18 TX0+ Channel 0 Data +
7 SDA DDC Data (bidirectional) 19 SHLD0/5 Channels 0 and 5 Shield
8 VSYNC NC 20 TX5- NC
9 TX1- Channel 1 Data - 21 TX5+ NC
10 TX1+ Channel 1 Data + 22 SCL_GND DDC Clock Ground
11 SHLD1/3 Channels 1 and 3 Shield 23 TXC+ Clock +
12 TX3- NC 24 TXC- Clock -
Pin Code Analogue Function Pin Code Analogue Function
C1 R NC C4 HSYNC NC
C2 G NC C5 ANL_GND Ground
C3 B NC
Note: This connector only supports the DVI-D signal.
7.3. D-Sub 15pin Connector
Pin Signal Pin Signal Pin Signal
1 Red video 6 Red ground 11 Ground Shorted
2 Green video 7 Green ground 12 Data (SDA)
3 Blue video 8 Blue ground 13 H. Sync
4 Ground 9 5V 14 V. Sync
5 GND 10 Ground Shorted 15 Clock (SCL)
7.4. Preset Timing
polarity Frequency
Mode
Pixel Clk
MHz
H V
FH
(kHz)
FV
(Hz)
VGA 640 x 480 25.2 - - 31.5 60.0
VESA 800 x 600 40.000 + + 37.9 60.3
VESA 1024 x 768 65.000 - - 48.4 60.0
VESA 1280 x 1024 108.000 + + 64.0 60.0