User's Manual

4.2. OSD MENU Adjustments and Settings

The following table shows all adjustment and setting menus.

Main Menu Sub Menu Reference

Gamma 1

Gamma 2

Gamma 3

Gamma 4

Gamma 5

Gamma 6

Gamma

Gamma 7

Choose suitable mode according

to different application

9300

6500

Color Temp

User

Choose suitable color temp

according to different application

English

Language

Chinese

Select display language

D-SUB

Signal

DVI

Select input Signal

Default Reset to the default value

Auto Adjust

Exit Colse the OSD menu

4.3. Screen Adjustment

Screen adjustments for the monitor should be used in suppressing screen flickering and

also for adjusting the screen to its proper position. There is only one correct position for

each display mode. It is also recommended to use the OSD Menu function when first

installing the display or whenever changing the system.

Note: Allow the monitor to stabilize for at least 20 minutes before making image

adjustments.

Making adjustment must be VGA signal.

Adjustment Procedure

1. Adjust by <Auto Adjust> menu in the OSD Menu or using shortcut key

“AUTO”with 3 seconds

To automatically adjust the clock, phase, screen position.

Making adjustment must be VGA signal.

Note:

The Auto sizing function is intended for use on the computer running Windows. It may

not work properly when the computer is running on MS-DOS (Not windows) or the

background color for the "wall paper" or "desktop" pattern is set to black.