User Manual LCD Monitor Model: CL1980GT/ET REV: A0 0621980706
TABLE OF CONTENTS 1. SAFETY SYMBOLS & PRECAUTIONS .............................................................................. 3 1.1. SAFETY SYMBOLS......................................................................................................... 3 FCC Warning:................................................................................................................................................. 3 1.2. PRECAUTIONS ............................................................................
1. SAFETY SYMBOLS & PRECAUTIONS 1.1. SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Alert electrical hazard. Indicates a prohibited action. Indicates to ground for safety.
1.2. PRECAUTIONS To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. Do not open the cabinet or modify the unit.
Use the correct voltage. - The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or equipment damage. - Do not overload your power circuit, as this may result in fire or electric shock. Handle the power cord with care. - The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or equipment damage.
CAUTION Handle with care when carrying the unit. Disconnect the power cord and signal cables and remove the optional unit. Moving the unit with the cord or the option attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. - Do not place any objects on the ventilation slots.
2. INTRODUCTION Thank you very much for choosing this monitor. 2.1. Features - VGA analog input DVI digital input compliant Resolutions up to 1280x1024. Power management system conforms to VESA DPMS standard. Supports DDC1/2B for Plug & Play compatibility. Advanced On Screen Display (OSD) control for picture quality adjustment 2.2. Package Contents Please contact your local dealer for assistance if any of the listed items are missing or damaged.
3. CABLE CONNECTION 3.1. Before Connecting Before connecting your monitor to the computer, change the display screen settings (Resolution and frequency) in accordance with the charts below. Note: - The lower display modes like 640x480, automatically enlarge to the maximum display mode (1280x1024), and some lines of the characters may become fuzzy.
4. ADJUSTMENT This monitor will not likely require adjustment. Variations in video output and application may require adjustments to the monitor to optimize the quality of the display. For best performance, the monitor should be operating in native resolution 1920 x 1080. Use the Display control panel in Windows to choose 1920 x 1080 resolution. Operating in other resolutions will degrade video performance. All control adjustments are automatically memorized. 4.1.
4.2. OSD MENU Adjustments and Settings The following table shows all adjustment and setting menus. Main Menu Sub Menu Reference Gamma 1 Gamma Gamma 2 Gamma 3 Gamma 4 Gamma 5 Choose suitable mode according to different application Gamma 6 Gamma 7 9300 Color Temp Language Signal 6500 User English Chinese D-SUB DVI Default Choose suitable color temp according to different application Select display language Select input Signal Reset to the default value Auto Adjust Exit Colse the OSD menu 4.3.
5. TROUBLESHOOTING If a problem persists even after applying the suggested remedies, contact a dealer. Problems Points to check with Possible Solutions 1. No picture Check that the power cord is correctly connected. If the Indicator status: Off problem persists, turn off the monitor power for a few minutes, then turn it back on and try again. - when the signal is not inputted correctly, even if the monitor functions properly.
6. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. Note: Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. Cabinet To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to the manual of the PC.
7. SPECIFICATION 7.1. Specification Display characteristics Size: Supported color : Native resolution: Pixel pitch: Viewing angle: Brightness: Contrast ratio: Response time: Physical specifications Standard mounting: Power supply: Power consumption: Power saving: Operating temperature: Storage temperature: Relative humidity: MTBF External connections Digital signal: Analog signal 376.32（H）x301.056（V）active display 16.7M colors 1280x1024 0.294mm x 0.294mm 178°, V/H @ (CR=10) 300cd/㎡ Typ 1300:1Typ. 8 ms Typ.
7.2.
8. CAVEAT EMPTOR/GUARANTEE EXCLUSION Claims for defects do not exist in the following cases: - Natural wear and tear, and any damage, errors, reduced output or changes in the condition or function of our products that are due to external factors (e.g.
