User Manual 21.
TABLE OF CONTENTS 1. SAFETY SYMBOLS & PRECAUTIONS .............................................................................. 3 1.1. SAFETY SYMBOLS......................................................................................................... 3 1.2. PRECAUTIONS ................................................................................................................ 3 2. INTRODUCTION..........................................................................................................
1. SAFETY SYMBOLS & PRECAUTIONS 1.1. SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Alert electrical hazard. Indicates a prohibited action. Indicates to ground for safety. 1.2.
Set the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. - Do not place outdoors. - Do not place in the transportation system (ship, aircraft, trains, automobiles, etc. - Do not place in a dusty or humid environment. - Do not place in a location where the steam comes directly on the screen. - Do not place near heat generating devices or a humidifier. - Do not place in an inflammable gas environment.
CAUTION Handle with care when carrying the unit. Disconnect the power cord and signal cables and remove the optional unit. Moving the unit with the cord or the option attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. - Do not place any objects on the ventilation slots.
2. INTRODUCTION Thank you very much for choosing this monitor. 2.1. Features - VGA analog input DVI digital input compliant Display Port 1.1a compliant Resolutions up to 1920x1080. Power management system conforms to VESA DPMS standard. Supports DDC1/2B for Plug & Play compatibility. Advanced On Screen Display (OSD) control for picture quality adjustment 2.2. Package Contents Please contact your local dealer for assistance if any of the listed items are missing or damaged.
3. CABLE CONNECTION 3.1. Before Connecting Before connecting your monitor to the computer, change the display screen settings (Resolution and frequency) in accordance with the charts below. Note: - The lower display modes like 640x 480, automatically enlarge to the maximum display mode (1920 x 1080), and some lines of the characters may become fuzzy.
4. ADJUSTMENT This monitor will not likely require adjustment. Variations in video output and application may require adjustments to the monitor to optimize the quality of the display. For best performance, the monitor should be operating in native resolution 1920 x 1080. Use the Display control panel in Windows to choose 1920 x 1080 resolution. Operating in other resolutions will degrade video performance. All control adjustments are automatically memorized. 4.1.
4.2. OSD MENU Adjustments and Settings The following table shows all adjustment and setting menus.
4.3. OSD MENU Adjustments and Settings Screen Adjustment Screen adjustments for the monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. It is also recommended to use the OSD Menu function when first installing the display or whenever changing the system. Note: Allow the monitor to stabilize for at least 20 minutes before making image adjustments. Making adjustment must be VGA signal.
5. TROUBLESHOOTING If a problem persists even after applying the suggested remedies, contact a dealer. Problems Points to check with Possible Solutions 1. No picture Check that the power cord is correctly connected. If the Indicator status: Off problem persists, turn off the monitor power for a few minutes, then turn it back on and try again. - when the signal is not inputted correctly, even if the monitor functions properly.
6. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. Note: Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. Cabinet To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to the manual of the PC.
7. SPECIFICATION 7.1. Specification Display characteristics Size: Supported color : Native resolution: Pixel pitch: Viewing angle: Brightness: Contrast ratio: Response time: Vertical frequency: Horizontal frequency: External connections Digital signal: Analog Video Input: 21.5″ active display 16.7M colors 1920 x1080 0.248 x 0.248 mm R/L 170°, U/D 160° @ contrast ratio = 10 250cd/㎡ Typ 3000:1Typ. 25 ms Typ. 50-76 Hz 31-80 kHz Display Port, DVI-D 15 pin D-sub 7.2.
7.3.
7.5. Preset Timing Mode PixelClk MHz polarity H V Frequency FH FV (kHz) (Hz) VGA 640 x 480 25.175 - - 31.469 59.940 VGA 720x400 28.320 + + 31.469 70.087 VESA 640x480 31.500 - - 37.500 75.000 VESA 800 x 600 40.000 + + 37.879 60.317 VESA 800 x 600 49.500 + + 46.875 75.000 VESA 1024 x 768 65.000 - - 48.363 60.004 VESA 1024 x768 75.000 - - 56.476 70.069 VESA 1024 x768 78.750 - - 60.023 75.029 VESA 1280 x 1024 108.000 + + 63.981 60.
8.
9.
10. Vendor Europe: Headquarter (North America): FCC Warning: z This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: z (1) this device may not cause harmful interference, and z (2) this device must accept any interference received, including interference that may cause undesired operation. z Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
