User's Manual

Page 21 of 26
Picture diagonal 19" or 48 cm
Native resolution 1280 x 1024 (full-screen format)
Pixel organization 3 vertical sub pixels
Pixel pitch 0.294 mm x 0.294 mm
Contrast ratio Typically 900:1
Horizontal viewing
angle
Typically ± 85° (CR≥10)
Vertical viewing angle Typically ± 80° (CR≥10)
Backlight LED
Brightness Max backlight: brightness MIN 260 cd/m² .
Factory setting: 200 cd/m²
(with touch screen)
Lifetime of backlight 50,000 hours typically for LED
(applies to an ambient temperature for the backlight of 25°C)
8.2 Power supply
Input Voltage AC100-240V± 20%, 50 / 60Hz; <0.9A
Normal operation <50W
Power
Consumption
Power saving <5W
Power Supply
Input Connector 3P IEC Type
8.3 Electronics
Multi-standard
technology
Video modes with resolutions less than 1280 x 1024 can be expanded
to the TFT resolution, and thus utilize the full display area (like
multi-sync CRTs).
In the same way, resolutions higher than 1280 x 1024 can be reduced
and then displayed. (Caution: depending if the timing is frame
buffered or frame sync, image information might get lost; the gray
levels - the color depth for color images - will also be reduced
and might be visible)
Timing recognition H frequency, V frequency