User's Manual

0
7
5
1
2
8
3
4
9
6
/
/
2
3
4
5
6
7
8 9
10
11
12
[CN]
1
M3
Bluetooth Headset
B
l
u
e
t
o
n
o
I
t
h
-
.
L
i
n
e
Micro USB
charging cable
3.5mm stereo cable
pouch
Accessories
Specification
SKU: BTX500
Talk Time: 15 hours
Standby Time: 25 days
Charging Time: 2-3 hours
Wireless Range: 10m(33ft)
Bluetooth: V4.0
Weight: 265g
Size: 200(L)x175(W)x45(T)mm
②Next Song
⑤Multi-Function Button
Bluetooth Pairing
Answer/End Call
Play/Pause Music
① Volume Up
④Previous Song
⑥LED Indicator
③Volume Down
Charging
Turn On
Set the On/Off Switch to On, blue LED
indicator lights up for 2 seconds, with
boot prompt. If the M3 was
connected with your devices before,
the last one can be reconnected when
M3 is in standby.
Turn Off
Set the On/Off Switch to Off,
blue LED indicator lights up for
3 seconds, with turn-off prompt.
Pairing
(It will automatically power off if
there is no connection for 5 minutes.)
Answer Call
Under pairing mode, tap
Multi-Function button to
answer an incoming call,
a prompt tone can be
heard.
End Call
While on a call, tap
Multi-Function button to
end the call, prompt tone
can be heard.
Under pairing mode,
double tap
Multi-Function button to
reject an incoming call,
prompt tone can be
heard.
Reject Call
In pairing mode, double
tap Multi-Function button to
redial the last number you
called.
In pairing mode, simultaneously
tap the Previous Song and
Multi-Function button to initiate
a voice dial.(only available for
Bluetooth enabled cellphones)
Voice Dial
Redial
Play/Pause
Previous/
Next Song
While listening to music, tap
Multi-Function button to
play/pause the music.
Volume Up/
Volume Down
Switch Cellphone & M3
During a call, press & hold Multi-Function button for 2 seconds to switch the
call from M3 to cellphone or from cellphone to M3, a
“beep” tone will be heard.
EQ Switch
While playing music, press & hold Multi-Function button to switch between different
EQ types, a prompt tone will be heard.
Bluetooth Status Indicator
Connected
Disconnected
LED blinks once every 7 seconds
Battery low
LED blinks twice every 7 seconds
LED blinks twice every 2 seconds
Pairing mode LEDs blink
Talking
Music play LEDs blink gradually
LED blinks twice every 3 seconds
Charging
LED remains on
Charging complete
LED is off
Battery Status Indicator:
1. There will be “Battery Low” voice
prompt when the battery voltage is
between 3.0V and 3.3V, LED blinks
white quickly.
2. When the battery voltage is lower than 3.0V,
it will automatically power off.
FCC Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution
The manufacture is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user
authority to operate the equipment.
Limited Warranty
Thank you for your purchase of MIPOW's product. MIPOW warrants that the product is
at the time of its original purchase free of defects in workmanship and material. This
limited warranty for the product shall last for twelve(12) months from the date of original
purchase. This original warranty card and original invoice must be presented at the time
you require warranty service or such warranty will be voided. This limited warranty is valid
only if the product is used for the purpose for which it was designed. It does not apply to
damage or loss caused by negligence; physical abuse; misuse; accident; exposure to
moisture; dampness or extreme thermal; unauthorized modifications; unauthorized
opening or repair; forces of nature; or other actions beyond the reasonable control of
MIPOW. In case of with the warranty does not apply, a repair or replacement charge will
be incurred. The customer shall be responsible for sending the defective product to and
collecting the repaired or replaced product from the service centre.
NB: MIPOW reserves the right to interpret the terms and conditions contained herein;
and the right for any changes without prior notice.
Stereo Bluetooth Headphone M3
Warranty Card
MP3
PhoneTablet
PC and Notebook
on off
DC
Wired Connections
USB Input Port
3.5mm Jack
Connector
On/Off Switch
Retractable
3.5mm jack
stereo cable
While in standby mode, pull out the 3.5mm
jack stereo cable to connect with your
device.
While in wired connection, the operation varies in
iOS system and Android system.
Use the included Micro USB
charging cable to connect
the M3 to any USB
powered computer or wall
charger.
When the M3
is in low battery, “Battery
Low” voice prompt can be
heard and the white LED
indicator flashes quickly.
Fully charging M3
takes 2-3 hours.
Under standby mode, press & hold the Next Song
button and tap the Multi-Function button, the LED
indicator will flash green and white alternately, then
open your device’s Bluetooth settings, add or search
for devices when “ M3” appears, select it
andpair your device.
While listening to music,
tap button to play previous song, " < ”
prompt tone will be heard;
tap button to play next song, “ > ”
prompt tone will be heard.
During a call or music play,
tap “+” button to volume up
and “-” button to volume down.
(the highest and lowest volume
will be prompted)
V1.0