User's Manual

LCD
Display
Name Character Field
Displays caller’s name and operational menus.
Number Field
The number field will display numbers when dialing, viewing Caller ID, and when
viewing the phone book.
Date/Time Display
Shows the date and time of Caller ID calls or current date & time when idle.
NEW Icon
When in idle mode, the NEW call icon will flash slowly when a new Caller ID call
has been received. The number of new caller ID calls is listed next to the icon.
Entry Number
When in any of the menus, a number is listed here. This number indicates the
place in the list, such as the 38th caller ID entry.
RPT Counter
When viewing caller ID entries, the RPT icon indicates that the same Caller ID
number has called more than one time since Caller ID memory has last been
reviewed. Next to the RPT icon is a counter that indicates how many times that
caller has called since the last review.
Total Call Counter
The Total Call Counter will show the total number of Caller ID messages
received, the total number of phone numbers stored in the phone book, etc.,
depending on the display mode.
LOCATION OF CONTROLS AND FEATURES
14
Data Jack
Used for connecting a
computer or fax machine.
Ring On/Off Switch
Used to turn the base ringer on and off.
Tone/Pulse Switch
Used to set the dialing method for tone or pulse dialing.
ICM/ANNC Switch
Used to choose between Announcement and Announce only modes.
Message Alert Switch
Used to turn on and off the beeping that alerts you there are new messages.
LOCATION OF CONTROLS AND FEATURES
13
Name Character Field
Date/Time
Display
New Icon
or Entry
Number
RPT or
Total Call
Counter
Number Field
Base Bottom View
Base Back View
Data Jack
Antenna
RINGON /RINGOFF
ICM/ANNC
TONE/PULSE
VOLUME
ON OFF
MESSAGE ALERT
Tone/Pulse Switch
Ring On/Off Switch
ICM/ANNC Switch
Message Alert Switch