User's Manual

3. Talk T
The T key is used to access the telephone line or end a call.
4. Temporary Tone Key *
If the base is set to pulse dialing, pressing * causes subsequent digits to be
dialed out using tone until the line is put back on hook.
5. Menu Key M/VOICE MAIL
The M
key is used to access the handset settings. The M/VOICE
MAIL key can also be programmed to do two-touch dialing of a single number,
such as your voice mail service number.
6. Microphone
7. Volume Switch
(Hi/MID/LOW)
Adjust the switch to select the receiver volume – choose between HI, MID, and
LOW.
8. Flash Key F/EDIT
The F
/EDIT key is used to access telephone company services, like call
waiting. It is also used to create and edit phone book entries.
9. Redial Key R/SAVE
When the phone is idle or off-hook, press R
to redial the last number
dialed. The R
/SAVE key is used to save numbers into the phone book
and other settings. It is also used to insert a programmable pause into a
number stored in the phone book.
10. Option Key #/OPTION
The #
/OPTION key is used to change the 7/10/11 digit dialing mode during
caller ID callback.
11. Dial Pad
Numeric keys are used in the conventional manner for dialing on the handset.
Also used to operate the answering machine when in remote mode.
1
/Play Plays any messages.
2
/Erase Erases the currently playing message.
3
/OGM Begins OGM recording.
4
/Repeat Repeats the currently playing message.
5
/Stop Stops the current activity.
6
/Skip Skips the currently playing message.
7
/Menu Plays a list of the commands available from remote mode.
LOCATION OF CONTROLS AND FEATURES
Handset
1. View Left Key
Use to view the left part of the display and move the cursor left when editing.
2. Up/Down Key  
The   key let you scroll through menus and logs. Also used to access Caller
ID information stored in memory.
LOCATION OF CONTROLS AND FEATURES
87
12.
15.
14.
6.
9.
11.
13.
17.
10.
7.
3.
4.
5.
16.
1.
8.
2.