User's Manual

Connecting the Base

1. Connect the telephone line cord to the "LINE" jack and to a telephone outlet.

2. Connect the AC power adapter to the 9V DC jack and to an AC outlet.

Note: Use only the supplied AC power adapter. Do not use any other AC

power adapter. Connect the AC power adapter to a continuous power

supply. Place the phone close to the AC outlet so that you can plug in

the AC power adapter easily.

Tip: If your telephone outlet is not modular, contact your telephone company for

assistance.

TELEPHONE SETUP

Do the following:

• Choose the best location

• Connect the phone

• Choose the dialing mode

Where you place the phone affects the reception quality of the handset:

• Away from another cordless telephone

• Place the base near an AC electrical outlet and near telephone line jack

• Place the base away from metal walls and metal file cabinets

• Raise the base unit’s antenna making sure it points towards the ceiling

CAUTION: The cordless telephone operates at a frequency that may cause

interference to nearby TVs and VCRs; the base phone should not

be placed near, or on top of a TV or VCR. If interference is experi-

enced, moving the cordless telephone farther away from the TV or

VCR will often reduce or eliminate the interference.

Note: While the 2.4GHz frequency is inherently clearer, we suggest that

you do not use this phone within 20 feet of a working microwave.

The microwave produces frequencies in this range which may

cause interference. This interference is normal for all 2.4GHz

phones and should not be considered a product defect.

CHOOSING A LOCATION

Away from noise sources such as a

window by a street with heavy traffic

Away from VCRs and TV sets and

other electronic equipment

Away from heat sources, such as

radiators, air ducts, and sunlight

Away from a microwave oven

Away from excessive

moisture, extremely low

temperatures, dust,

mechanical vibration, or

shock

Away from a

personal computer

Near a central

location and on a

level surface