User's Manual

Handset
1. View Left Key 
Used to view the left part of the display and move the cursor left when editing.
2. Up/Down Key 
The key lets you scroll through menus and logs, and adjust the handset
volume.
3. Talk T
The T key is used to access the telephone line or end a call on the handset.
4. Temporary Tone key *
If the base is set to pulse dialing, pressing * causes subsequent digits to be
dialed out using tone until the line is put back on hook.
5. Intercom Key /Menu
Press to initiate an intercom connection between the handset and base.
This key is also used to access the programmable functions of your phone.
6. Microphone
7. Receiver Volume Control
(Low/Mid/Hi)
Adjust the switch to select the handset receiver volume – choose LOW, MID, or HI.
8. Flash Key F/EDIT
The F
/EDIT key is used to access telephone company services, like call
waiting. It is also used to create and edit phone book entries.
9. Redial Key R/SAVE
When the phone is idle or off-hook, press R
to redial the last number dialed.
The R
/SAVE key is used to save numbers into the phone book and other
settings. It is also used to insert a programmable pause into a number stored in the
phone book.
10. Option Key #/Option
The #
/Option key is used to change the 7/10/11 digit dialing mode during caller
ID callback.
11. Dial Pad
Numeric keys are used in the conventional manner for dialing on the handset.
12. Headset Jack
Allows using a headset for hands-free convenience.
13. Directory Key d
Use d to program and retrieve the numbers in the speed dial directory.
14. Delete Key D/CHAN
When viewing or editing menus and logs, the D
key is used to erase digits on
the display, and single or multiple entries from the phone book and Caller ID directo-
ries. The D
/CHAN key, when pressed while the phone is off-hook, will scan up
to 50 channels and select the clearest one to provide the best possible reception.
15. Liquid Crystal Display (LCD)
16. View Right Key

Used to view the right part of the display and move the cursor right when editing.
17. New Call Light
INT
INT
LOCATION OF CONTROLS AND FEATURES
8
LOCATION OF CONTROLS AND FEATURES
DIR
Save
INT
Menu
Redial
Delete
CHAN
7
12.
15.
14.
6.
9.
11.
13.
17.
10.
7.
3.
4.
5.
16.
1.
8.
2.