User's Manual

Using the Intercom/Handset Finder (PAGE)
From the base:
1. Press [Page/ICM] on the base. If the phone is in range, the
handset will beep for up to 20 seconds.
2. Press on the handset, enabling the handset to
intercom with the base. Press any other key on the handset
to stop the handset page/find feature.
3. Press either intercom key to end the intercom connection.
From the handset:
1. Press on the handset. If the phone is in range, the
base will beep for up to 20 seconds.
2. Press the [
Page/ICM] on the base, enabling the base to intercom with the handset.
3. Press either intercom key to end the intercom connection.
Note: If a call is received while the unit is in the intercom mode, the intercom
connection is automatically disconnected.
Out-of-Range Warning
If you venture too far from the base, the handset will beep. Reverse your direction to
re-establish connection with the base or the call will be dropped. When the base
detects that the handset has been out of range for 20 continuous seconds it will
release the engaged line.
Channel Changing
If you are experiencing interference during a telephone call, press D/CHAN.
The PMP-3850 will scan up to 50 channels and select the clearest one to provide
the best possible reception.
Extension In-Use
The PMP-3850 is capable of detecting when another phone that is connected to the
same phone line is being used. In this situation, the display will show “
EXT IN-USE”
and the Private Call indicator will blink on the LCD screen. You will have to wait until
the line is free to make a telephone call.
If, during a conversation, the base IN USE LED begins to blink,
an extension phone has gone off-hook.
Note: If the telephone line cord is not connected to the wall jack and the telephone
base, the display will also indicate “EXT IN-USE.”
INT
INT
OTHER FEATURES
44
Call Transfer/Three-way Calling
The PMP-3860 is designed for easy communication between the handset and
base speakerphone. You can transfer a call from one to the other, or you can
have a three-way call between the handset, base, and a caller.
Transfer from the handset to the base:
1. After a call has connected using the handset, press
on the base. The conversation becomes active on both
the speakerphone and the handset.
2. You may continue a 3-way call between the person on the line, the handset,
and the speakerphone, or you can transfer the call by pressing T
or placing
the handset back in the base.
3. Continue your conversation on the base.
4. To end the call, press .
Transfer from the base to the handset:
If the handset is in the base cradle when the speakerphone call is made, you
can simply transfer the call to the handset by lifting the handset from base. The
speakerphone will automatically deactivate.
If the handset is not in the base:
1. After a call has connected using the base, press T
on
the handset, the conversation becomes active on both the
handset and the base.
2. You may continue a 3-way call between the person on the line, the handset,
and the speakerphone, or you can transfer the call by pressing .
3. Continue your conversation on the handset.
4. To end the call, press T
, or place the handset back into the base.
Speaker
Speaker
Speaker
CALL TRANSFER
43
INTCOM
INTCOM
00 04
MIN
SEC
3-WAY CALL
00 04
MIN
SEC
3-WAY CALL