User's Manual

GLOSSARY
22
No dial tone/phone will not dial out.
• Check that the AC power adapter is plugged into a working AC power outlet.
• Check all telephone cord connections or try another wall jack.
• Do a basic reset of the phone: Disconnect the phone from the wall and
remove the battery. Leave for 30 minutes and then re-install as instructed by
the manual.
Can’t hear the ring signal.
• Check the ringer volume controls; verify that the switch is not set to “Off.”
While on a call, you hear another call on the line or experience radio
frequency interference.
• Switch channels to a clear channel.
• Check the wiring for bad connections.
• Do not use this phone within 20 feet of a working microwave. The microwave
produces frequencies in this range which may cause interference. This
interference is normal for all 2.4GHz phones and should not be considered a
product defect.
Can't receive or make phone calls.
• Check if the phone is set to the correct type of service, either Tone or Pulse.
TROUBLESHOOTING
21