User's Manual

Your PMP-3815 telephone has been designed to give years of trouble-free
service. It is a sensitive electronic instrument. To assure its longevity, please
read the following maintenance instructions.
1. Keep the PMP-3815 away from heat as high temperatures can shorten the
life of the electrical components and distort or melt its plastic parts.
2. The PMP-3815 should be kept free of dust and moisture. If it gets wet, wipe
it dry immediately. Liquids can contain minerals that can corrode electronic
circuits.
3. Handle your PMP-3815 gently and carefully. Dropping it can cause serious
damage to circuitry, or the plastic case, which may result in malfunction.
4. Do not use any type of chemical or any abrasive powder to clean the
cabinet. Use only mild detergents on a soft, damp cloth to clean the PMP-
3815 telephone.
5. The PMP-3815 has built-in surge protection circuits that meet or exceed
FCC requirements. However, an incident such as a lightning strike at or near
the telephone lines, could cause serious damage.
6. If the PMP-3815 is installed in an area with frequent or severe electrical
storms, it is suggested that the telephone be disconnected during these
storms or that additional surge suppression equipment be added to the
installation.
7. In the case of trouble with the telephone, do not attempt to repair the
telephone yourself. It is the responsibility of users requiring service to report
the need for service to our Service Department. They will make the
necessary arrangements for repair or replacement.
8. If you should have any questions about the operation of your PMP-3815
telephone, please call our Service Department at
1-800-592-1336. Or you
may contact TT Systems LLC for technical assistance via our Internet Web
site:
www.ttsystems.com or e-mail: [e-mail].
9. Please register your product online at
www.ttsystems.com/CustomerSupport/RegOnline.asp
CARE AND MAINTENANCE
20
Using the Handset Finder (PAGE)
1. Press on the base. If the handset is within range, a quadruple beep
will sound for 60 seconds.
2. Place the handset back into the base to stop the page/find feature.
Security Code
The security code prevents your cordless telephone conversation from being
accessed by a phone on a different line. Once the handset battery is fully
charged, the handset will automatically select the code from a total of over
65,000 combinations. The code is changed every time the handset is placed in
the cradle (indicated by a beep).
If you experience difficulty with placing or receiving calls, a lost security code
may be the cause of the problem. When this occurs, the handset can no longer
communicate with the base. Reset by placing the handset on the base for 5-10
seconds. If that does not work, unplug the AC adapter from the wall outlet.
Disconnect the handset battery for 5-10 seconds and then reconnect. Place the
handset back on the base and then replug the AC adapter.
Channel Changing
If you are experiencing interference during a telephone call, press the c
key. The PMP-3815 will scan up to 50 channels and select the clearest one to
provide the best possible reception.
Out of Range Warning
If the handset is moving too far away from the base, the phone will sound a
beep to warn you that it is out of range. Move closer to the base to end the
beeping and maintain the connection on your phone call. Otherwise, the call
may be disconnected.
19
OTHER FEATURES
PAG E