User's Manual

Answering System Operation
35
C. To erase selected messages/memos
1. While the unwanted message is playing, press the ERS button. The
Answering System announces erasure of the selected message/memo.
After the erasure is complete, the numeric order of the remaining
messages will be rearranged.
When the Memory is Full
When there is no memory available for additional messages, the Answering
System will announce, “Memory full,” but will not save messages.
Two-Way Recording
Two-way recording allows you to record your conversation with another caller.
Two-way recording can be enabled during conversation while you are using the
HANDSET.
1. During conversation, press a mailbox button (MAILBOX 1, 2, 3, or 4) where
you want to record your conversation. The corresponding MAILBOX LED
indicator will blink.
2. Press and hold down the MEMO button. The LED Message Display will
show “2r” to indicate the recording mode.
3. Release the MEMO button to end your conversation recording.
4. Also you can record on the PRIMARY MAILBOX, just follow steps 2 and 3.
NOTE: Recording two-way conversations may be subject to local, state or federal
laws and regulations. Consent of both parties is required when a conversation will
be recorded.
Remote Operation through a Tone Telephone
You can use many Answering System features when you are away from home. To
protect your privacy, most of the features can be used only after you enter the three-
digit Remote Access Code.
Remote Access Codes
The Remote Access Codes are preset at the factory as shown below. You can use
the preset codes or choose your own.
PRIMARY MAILBOX: 999
MAILBOX 1: 555
MAILBOX 2: 666
MAILBOX 3: 777
MAILBOX 4: 888