User's Manual

Placing Calls from the DIRECTORY (PHONE BOOK)

1. Press the Dir button.

2. Press the SCROLL UP or DOWN button to find the record you want to call.

Press a TELEPHONE KEYPAD (2/ABC to 9/WXYZ) that corresponds to the first letter

of a Caller’s name. Press the SCROLL UP or DOWN button to find the record

you wish to call.

3. Press the #/Option button to change the displayed number to 7, 10, or 11 digits. The

first dialing option displayed is the 11 digits for a long distance call.

Press the #/Option button for the

second time, the displayed number will

change to 7 digits for a local call.

Press the #/Option button for the third

time, the displayed number will change

to 10 digits for a local call with area code.

4. Press the Talk button to dial the displayed number.

5. To end the call, either press the Talk button or place the HANDSET on the BASE

UNIT.

Editing a Stored Number in the DIRECTORY (PHONE BOOK)

1. Press the Dir button.

2. Press the SCROLL UP or DOWN button to find the record you wish to edit.

3. Press the Flash/Edit button. The entry will display with a flashing prompt

over the first character.

4. Move the cursor to the letter or number you wish to edit by pressing the SCROLL UP

or DOWN , SHIFT RIGHT or LEFT button.

To erase a character or digit, press the Scan/Del button.

To add a letter or number, use the TELEPHONE KEYPAD 1 to 0 buttons. Characters

or numbers will be inserted in front of the cursor (See page 18 for details.)

Caller ID System Operation

RPT

First press.

Second press.

Third press.

TOTAL