User's Manual

10
Getting Started
Connecting Your Phone
This section is a reference guide to the basic functions and operations of your cordless
telephone. For more detailed descriptions of the operations and features of this telephone,
refer to the Contents on page 1.
1. Carefully remove your cordless telephone from its shipping carton. If there is any visible
damage, do not attempt to operate this equipment. Return it to the place of purchase.
2. Check to be sure you have all items that come with this cordless telephone system. You
should have a HANDSET, BASE UNIT, AC ADAPTOR, BATTERY PACK, TELEPHONE LINE
CORD, BELT CLIP, HEADSET, and Owner’s Manual.
3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN CONNECTION
JACK at the back of the BASE UNIT.
4. Plug the AC ADAPTOR into a 120V AC wall outlet.
USE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 300mA.
5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and the
other end into the TELEPHONE LINE CONNECTION JACK at the back of the BASE UNIT.
(If you have an older 4-prong TELEPHONE JACK, you will need an RJ-11C TELEPHONE
JACK ADAPTOR. This adaptor is available at the same place you purchased your
telephone.)
6. We recommend not placing this unit next to appliances. Doing so may cause interference.
HANDSET
BASE UNIT
TELEPHONE LINE CORD
AC ADAPTOR
BELT CLIP BATTERY PACK
HEADSET
In Use
On/Off
Ans
Chg
ON/OFF
SKIP
OGM
ERASE
PAGE
MB-1
MB-2 MB-3
MB-4
HOUR
MINUTE DAY
MEMO
CODE SET
PLAY
REPEAT
ANS
STOP
AC
ADAPTOR
TELEPHONE
LINE CORD
TELEPHONE
JACK
120V WALL
OUTLET
TONE/PULSE
SELECT SWITCH
POWER-IN
CONNECTION
JACK
TELEPHONE LINE
CONNECTION
JACK
MSSG ALERT SELECT
RESET
9VDC 500mA
TEL LINE
ON OFF
ICM ANNC TONE PULSE
RING SELECT
TS 5R 3R
RINGER
ON OFF