User's Manual
6
B.4 Extension Phones
Extension telephones can be connected. This telephone can detect when an extension phone is being used
whether the HANDSET is ON-HOOK or OFF-HOOK. When you lift the HANDSET and an extension phone is
being used, “EXT IN USE” will be displayed and simultaneously the PRIVATE CALL indicator will blink on the
LCD Screen. This means that an extension telephone is in use. You will have to wait until the line is free to
make a call.
While you are having a phone conversation then suddenly the BASE UNIT IN USE LED indicator blinks, this
indicates that an extension phone is lifted or goes OFF-HOOK.
B.5 Using the Headset Feature
Your telephone can utilize a headset (not included) to be connected to your HANDSET for you to enjoy
hands-free communication. Insert the small plug at the end of the headset into the HEADSET JACK at the right
side of the HANDSET. Follow the procedures discussed in “Receiving Calls” and “Placing Calls” to receive and
place a call. When you plug the headset plug into the HEADSET JACK it automatically mutes the
MICROPHONE and SPEAKER of the HANDSET. Unplug the headset to return the HANDSET to normal use.
Headsets are available at most retail outlets that sell telephone equipment. The HEADSET JACK is compatible
with 2.5 mm headset plugs only.
B.6 Redial Feature
1. If you get a busy tone, press the TALK button or place the HANDSET on the BASE UNIT to hang up.
2. Later, press the TALK button again.
3. Listen for a dial tone.
4. Press the REDIAL button. This will automatically redial the last telephone number you called.
5. When you have finished with your call, press the TALK button again or place the HANDSET on the BASE
UNIT.
B.7 Out of Range Warning
While having a phone conversation and you take the HANDSET too far away from the BASE UNIT, the HANDSET
emits “beep” sounds to warn you that the background noise level is too high for proper communication between the
HANDSET and the BASE UNIT. When you hear this sound, you should move closer to the BASE UNIT to reduce
the noise level. Otherwise, the call will automatically cut off.
B.8 Handset Paging
To look for a misplaced HANDSET, press the PAGE button
in the BASE UNIT and the HANDSET will “beep” and the LCD
Screen will display “PAGING”. To stop the beeping, press the
PAGE button again or press any button in the HANDSET.
8:30 PM 12/25
EXT IN USE
8:30 PM 12/25
PAGING