User's Manual

15
Caller ID System Operation
C.9.6 PBX NUMBER
This unit will automatically operate in the PBX MODE ON system. You can preset the PBX number (such as
an 8 or 9) while you are using a switchboard system.
1. Press and hold the FUNC button for 2 seconds.
2. Press the TELEPHONE KEYPAD (6) button.
3. Press the EDIT button.
4. Press the SCROLL UP (ñ) or DOWN (ò) button. (OFF is the preset PBX number.)
PBX MODE OFF - set for direct line access.
5. Press and hold down the SAVE button.
6. Press the FUNC button to return to STANDBY mode.
NOTE: When placing a call, this telephone will automatically add the PBX number and a pause time before the
dialed telephone numbers.
C.9.7 FLASH TIME
This unit enables you to select the standard FLASH TIME applicable to your calling area. If you are not sure
of the FLASH TIME you are using, call your local telephone company.
1. Press and hold the FUNC button for 2 seconds.
2. Press the TELEPHONE KEYPAD (7) button.
3. Press the EDIT button.
4. Press the SCROLL UP (ñ) or DOWN (ò) button to select the FLASH TIME. You can also set the FLASH
TIME by entering the FLASH TIME number using the TELEPHONE KEYPAD 0~9 buttons. The preset
FLASH TIME is 600 milliseconds.
5. Press and hold down the SAVE button.
6. Press the FUNC button to return to STANDBY mode.
C.9.8 PAUSE TIME
This unit enables you to adjust the PAUSE TIME when placing a call using a switchboard system or dialing
a Long Distance calls.
1. Press and hold the FUNC button for 2 seconds.
2. Press the TELEPHONE KEYPAD (8) button.
3. Press the EDIT button.
4. Press the SCROLL UP (ñ) or DOWN (ò) button to adjust the pausing time. The preset pause time is
4 seconds.
5. Press and hold down the SAVE button.
6. Press the FUNC button to return to STANDBY mode.
C.9.9 VOICE MAIL
This telephone enables you to store the Voice Mail Post Code number in your area. This will automatically
connect you to the Voice Mail service provider with one-touch dialing.
1. Press and hold the FUNC button for 2 seconds.
2. Press the TELEPHONE KEYPAD (9) button.
3. Press the EDIT button.
4. Enter the Voice Mail Post Code number by using the TELEPHONE KEYPAD 0~9 buttons.
5. Press and hold down the SAVE button.
6. Press the FUNC button to return to STANDBY mode.