User's Manual

12
Special Features
Channel scan
Your FRS unit can scan for 14 channels. To scan the unit.
* Press Mode and UP buttons at the same time.
* Channel indicator will change continue.
* Once received any signal scan will stop and listen for 4 second.
* Press talk button and talk on that channel (scan will automatically stop )
or press up key to scan continue.
* To stop the scan press Mode button.
Automatic Battery Save
Your FRS unit has special circuitry designed to extend the life of your
battery. When the radio is not used for 4 seconds, it will automatically
switch itself into a low power mode.
The battery save dose not affect the radio ability to receive transmissions.
When the unit has any activity, it automatically returns to full power.
Lamp key
Once you press the Lamp key. Turn the LCD back lit, on for 10 seconds.
Respond prompt tone
When the person talk to you from an other radio, Finish speaking and
release his. Talk button, You will hear a tone from your unit. This means
the other radio is receive mode now and you can begin your
transmission.
External Microphone / Speaker jacks.
Your FRS radio can be used with an optional external microphone and
speaker, usually sold together in a headset combination. The jacks on
the top of the unit, under the protective rubber cover, are used for this
purpose.