User's Manual

Multi-HANDSET, Multi-BASE UNIT System Operation

Multi-HANDSET, Multi-BASE

Multi-HANDSET, Multi-BASE UNIT System

The system supports the registration of 9 HANDSETS to a BASE UNIT. The user can add

another BASE UNIT (B2) and register the same HANDSETS. The BASE UNITS must be

connected to separate telephone lines. The HANDSETS can make INTERCOM CALLS, and

CALL TRANSFERS to one another provided they are using the same BASE UNIT at that

time.

Intercom Call

1. With the HANDSET in STANDBY mode, press the

button . The LCD Screen of the initiating

HANDSET will display “Select H/S:.”

2. Enter the ID # of the receiving HANDSET by

pressing the TELEPHONE KEYPAD to

buttons.

3. The receiving HANDSET will receive a page tone

and the LCD Screen will display “Handset #,

Paging you.”

4. The receiving HANDSET will connect by pressing

the button. Both LCD Screens will display

“Intercom with:, Handset #.”

5. To end the INTERCOM CALL, press the

again. The LCD Screen of both HANDSETS will

return to STANDBY mode.

Receiving a Call while in Intercom Call

1. When an outside call is received, both HANDSETS

involved in the Intercom call will emit two short

double “beep” sounds. The Caller ID information, if

available, will display on the LCD Screens after the

alert beeps.

2. Press the button to terminate the

Intercom call.

3. Press the button to access the outside call.

1 9

DEL/INT

TALK

DSST~MAN~ATC.qxd 4/24/2003 5:15 PM Page 32